Optimization of the wash process and wash water recycling in the preparation of MgZnAl-CO3 layered double hydroxides

An MgZnAl-CO3 layered double hydroxide (LDH) slurry with Na2 SO4 as the by-product has been prepared by a co-precipitation method.The filtrates in the LDH washing process were collected according to their different levels of salinity.Filtrates with lower salinity can be used to wash a LDH slurry with higher salinity in the next cycle.Only in the final stages is pure water used.Recycling of the wash water in this way has been employed in a commercial production process,resulting in a water-saving of over 80%.The resulting MgZnAl-CO3-LDH product has a well-formed crystalline layered structure with a low content of impurities.     

Ion-exchange resin decomposition in supercritical water

Abstract

Using supercritical water oxidation, the cation exchange resin was decomposed fast and completely to water, carbon dioxide and sulfuric acid. While the resin decomposition yield increased with the reaction time and the amount of hydrogen peroxide added as oxidizing agent, it was constant in the resin concentration from 0.14 to 1.9 dry resin weight percent to water. More than 99% of the cation exchange resin was decomposed with hydrogen peroxide added in the amount of 7 times the stoichiometric value at 673 K and 30MPa for 30 minutes of the reaction time. The cation exchange resin is decomposed through two main reaction pathways. One has a rate controlling intermediate such as acetic acid whose decomposition rate was very slow, and the other does not have stable intermediates. The decomposition of the acetic acid is a significant factor for the complete decomposition of the resin, although it does not dominate the whole resin decomposition. A simple kinetic model that estimates the resin decomposition yield was developed.     

Advanced high-performance liquid chromatography method for highly polar nitroaromatic compounds in ground water samples from ammunition waste sites

An advanced HPLC-photodiode array detection method for the determination of 12 selected highly polar nitroaromatic compounds in ground water samples of ammunition waste sites has been developed and validated. After solid-phase extraction the limits of detection were in the range 0.1–0.5 μg/l. To prove the applicability of the method to other polar nitroaromatic compounds the retention time of another 32 polar compounds under the specified chromatographic conditions were determined and their UV spectra recorded. To review the method, interlaboratory comparisons were performed with a spiked and a real ground water sample.     

Fractionally differenced models for water quality time series

This paper deals with the selection and evaluation of statistical techniques for use in the modeling and forecasting of water quality time series. The focus is on statistical concepts relevant to the analysis of flows and concentrations. A selection of time series procedures has been used for auditing water quality archival data, including the screening of data sets, correlation and spectrum calculations, and iterative model fitting. A summary is provided of experience with analyzing archival data on the Niagara River and the use of a fractionally differenced model.This paper is the result of a study performed for the International Joint Commission, United States and Canada. The authors gratefully acknowledge the direction and support provided by Dr. Joel L. Fisher.     

Study of electron solvation in polar solvents using path integral calculations

A path-integral Monte Carlo algorithm for the simulation of electrons solvated in polar liquids is briefly outlined, and results are presented for the electron solvated in liquid water.     

Development of PE/PCL Bilayer Films Modified with Casein and Aluminum Oxide

The studied samples were prepared from polyethylene (PE) polymer which was coated with modified polycaprolactone (PCL) film in order to obtain bilayer films. Thin PCL film was modified with casein/aluminum oxide compound to enhance vapor permeability as well as mechanical and thermal properties of PE/PCL films. Casein/aluminum oxide modifiers were used in order to achieve some functional properties of polymer film that can be used in various applications, e.g., reduction of water vapor permeability (WVTR) and good mechanical and thermal properties. Significant improvement was observed in mechanical properties, especially in tensile strength as well as in water vapor values. Samples prepared with aluminum oxide particles indicated significantly lower values up to 60%, and samples that were prepared with casein and 5% Al₂O₃ showed the lowest WVTR value.     

Innovative stabilization/solidification processes of fly ash from an incinerator plant of urban solid waste

Fly ash samples from an incineration plant of urban solid waste (USW) were submitted to a stabilization/solidification process based on encapsulation with a polyester resin. With this process, a very limited increase of about 25% in weight and a compressive strength as high as 1200 kg/cm² can be obtained. The efficiency of the process to stabilize/solidify the residues and to reduce the pollutant release was evaluated by performing both mechanical and leaching tests following the IRSA–CNR standard method. The leaching test was based on treating the sample with an acetic acid solution adjusted to pH 5.2 for 24 h under magnetic stirring. Toxic metals (Pb, Cd, and Cu) and organic pollutants (PAHs, PCBs, and OCPs) were determined in raw fly ash samples and in the leaching solutions of treated samples. Raw residues showed higher concentrations of trace metals than the regulatory limits, whereas the stabilized/solidified residues showed a concentration of all the pollutants lower than the regulatory limits and a compressive strength much higher than the suggested minimum value. Finally, a critical comparison with conventional stabilization/solidification processes based on the use of Portland cement highlighted that the polyester resin-based process performed much better in terms of the release of both organic and inorganic pollutants, thus substantially lowering the environmental impact of these residues.     

Synthesis and characterization of proton‐conducting copolyimides bearing pendant sulfonic acid groups

A series of sulfonated copolyimides (co‐SPIs) bearing pendant sulfonic acid groups were synthesized from 1,4,5,8‐naphthalenetetracarboxylic dianhydride (NTDA), bis(3‐sulfopropoxy) benzidines (BSPBs), and common nonsulfonated diamines via statistical or sequenced polycondensation reactions. Membranes were prepared by casting their m‐cresol solutions. The co‐SPI membrane had a microphase‐separated structure composed of hydrophilic and hydrophobic domains, but the connecting behavior of hydrophilic domains was different from that of the homo‐SPIs. The co‐SPI membranes displayed clear anisotropic membrane swelling in water with negligibly small dimensional changes in the plane direction of the membrane. With water uptake values of 39–94 wt %, they showed dimensional changes in membrane thickness of about 0.11–0.58, which were much lower than those of homo‐SPIs. The proton conductivity σ values of co‐SPI membranes with ion exchange capacity values ranging from 1.95–2.32 meq/g increased sigmoidally with increasing relative humidity. They displayed σ values of 0.05–0.16 S/cm at 50 °C in liquid water. Increasing temperature up to 120 °C resulted in further increase in proton conductivity. The co‐SPI membranes showed relatively good conductivity stability during the aging treatment in water at 100 °C for 300 h. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1545–1553, 2005     

Phase behavior study of poly(N‐tertbutylacrylamide‐co‐acrylamide) in the mixture of water–methanol: The role of polymer–nonsolvent second‐order interactions

The phase behavior of poly(N‐tertbutylacrylamide‐co‐acrylamide) (PNTBAM) in pure water and mixture of water–methanol is studied at different temperatures. The different compositions of PNTBAM are prepared by free‐radical polymerization technique and their phase behavior is studied by turbidimetry. The effects of copolymer and solvent composition on the phase behavior of the copolymers are discussed. It has been suggested that the inhomogenities in polymer chains are responsible for lowering the rate of phase transition by increasing the N‐tertbutylacrylamide (NTBAM) and methanol contents in copolymer and mixture, respectively. For the first time we have revealed that there are second‐order binary interactions in the water–methanol which are dominant in the special range of copolymer composition. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 455–462, 2009